Email me when a new MSHA incident is filed at Coalburg Mine.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2021 Q1 | 0 | 0 | 0 | |
| 2020 Q4 | 0 | 0 | 0 | |
| 2020 Q3 | 3,152 | 4 | 0 | 1269.0 |
| 2020 Q1 | 20,357 | 36 | 9 | 1768.4 |
| 2019 Q4 | 893 | 22 | 4 | 24636.1 |
| 2019 Q3 | 1,028 | 15 | 1 | 14591.4 |
| 2019 Q1 | 357 | 2 | 0 | 5602.2 |
| 2018 Q4 | 14,687 | 9 | 1 | 612.8 |
A piece of draw slate approximately (3 foot by 2 foot by 3 inches thick) broke across the strap and fell striking ee. Injured miner was transported to a medical center. Due to medical complications from the injuries ee sustained ee died on 4/6/17
Employee was plastering a return stopping when the ladder employee was standing on fell over. Employee fell to the ground trying to catch themselves by putting out right hand. Employee hit the ground injuring right shoulder and right hip.
Employee was starting to drill a new hole when the steel hit them on the back of hand.
Employee was plastering a stopping and splattered plaster in their right eye.
A non-injury roof fall occurred on the #3 Belt Conveyor on Northwest Mains at survey station #546. The fall measured approximately 20 feet wide by 5 feet thick by 50 feet in length. A roof fall clean up plan has been submitted to MSHA and has been approved for clean up of the fall. This fall was immediately reported to MSHA. No person(s) were involved in the fall.
A non-injury roof fall occurred in the #4 on the Southwest Mains at survey station #976. The fall measured approximately 20 feet wide by 8 feet high by 50 feet in length. It is not affecting or impairing ventilation. It is located in a return air course. We do not intend on cleaning the fall up. We are dangering it off. No person(s) or equipment was involved in the fall.
A non-injury roof fall occurred in the #3 entry on the Southwest Mains at survey station #994. The fall measured approximately 20 feet wide by 8 feet high by 80 feet in length. It is not affecting or impairing ventilation. It is located in a return air course. We do not intend on cleaning the fall up. We are dangering it off. No person(s) or equipment was involved in the fall.
Roof Fall--70' in by the survey station #1042 in the cross cut between #4 entry and #3 entry on the 2nd Northwest Mains 3,400 feet from our section. This is an area where we pulled back from. It measured 6' thick by 16' wide by 35' in length. It is not affecting ventilation. We will not be cleaning the fall up, we are dangering it off. No employees or equipment was involved.
The accident took place on the haul road at #1 Pond area. EE came to the mine to pick up paycheck. EE left to go home traveling on the haul road. The location where the accident occurred was at the #1 Pond area, EE hit a coal truck head on in a curve driving EE's personal vehicle. EE was treated by Elite ambulance technicians and transported to ARH hospital in South Williamson.
The fall was located at the Northwest Mains 70' inby survey station 777 in the #6 intake entry. 30' wide by 30' long by 4' thick. Dangered off not cleaning up. No persons or equipment involved.
The location the fall took place was #1 entry 20 feet inby survey station 1021 of the Southwest Mains. The fall was 19' wide by 30' long by 8' thick. Dangered off not cleaning up. No persons or equipment involved.
Fall was outby survey station in the #2 neutral entry on Southwest Mains. It fell in an intersection and measured 30' long by 30' wide by 8' in thickness. It was located approximately 1800' outby the 010 mmu. No persons or equipment were affected by the fall. Set at least 2 rows of timbers on each side of the fall. Do not intend on cleaning the fall up. No ventilation was impaired.
The fall occurred in the #1 return entry of Southwest Mains 70 ft inby survey station 970. The fall was in an intersection and measured 20 ft wide by 20 ft long by 8 ft thick. The fall did not impair ventilation and we do not intend to clean up the fall. It was blocked off by setting 8 breaker timbers in all entrances. No persons or equipment involved. Roof fall only.
The fall occurred at the crosscut entry between #5 and #6 intake entry 140ft inby survey station #983 located on the Southwest Mains. The fall measured approximately 30ft long by 18 to 19ft wide by 7 to 8ft thick. The fall did not impair ventilation or obstruct the primary escape way. No persons or equipment were involved. The area was blocked off and isn't intended to be cleared.
Completed project, carrying survey equipment slipped and fell
A fall measuring 20' wide X 25' long X 4.5' thick occurred at 140' inby survey station 925 in the #7 right return entry on the Northwest Mains. The fall will not be cleaned up. We are re-routing the return around the fall. No persons of equipment were effected. All entrances to the fall will be barricaded with timbers or cribbed off
A roof fall measuring approximately 20' wide by 20' long by 6' thick was discovered 60' inby spad 403 in the #2 entry of west - sub mains. The fall will not be cleaned up.
The mine had a roof fall at survey station #10 in an intersection. The fall measured 30' L. X 7' Thick X 12' W. An addendum to the approved roof control plan will be submitted to MSHA to rehab the fall area.