CPM Development Corporation · Struck by falling object
Prying up scraper to flip over to weld a chain tie down. While lifting scraper, scraper fell back on their right leg cutting their shin.
East Valley Metal/Non-Metal
CPM Development Corporation
· Surface
Controlled by
CRH PLC
Yakima,
Yakima County,
WA
·
Active
MSHA Mine ID: 4503744
Watch this mine
Email me when a new MSHA incident is filed at East Valley.
- Fatalities
- 0
- Total incidents
- 5
- Years on record
- 2016–2023
- Latest incident
- Apr 2023
Compliance record
MSHA citations since 2016
46
citations
6
significant & substantial
$15,402
proposed penalties
$11,721
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 4,289 | 0 | 0 | 0.0 |
| 2025 Q3 | 100 | 0 | 0 | 0.0 |
| 2025 Q2 | 100 | 2 | 0 | 20000.0 |
| 2025 Q1 | 3,029 | 0 | 0 | 0.0 |
| 2024 Q4 | 100 | 2 | 1 | 20000.0 |
| 2024 Q3 | 5,460 | 4 | 1 | 732.6 |
| 2024 Q2 | 5,354 | 0 | 0 | 0.0 |
| 2024 Q1 | 7,128 | 8 | 0 | 1122.3 |
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.
Reportable incidents
5 on file2023 · 1 incident
2020 · 1 incident
May 8, 2020
WA · Metal/Non-Metal
crusher attendant/operator, pan feeder operator/worker
HANDLING OF MATERIALS
CPM Development Corporation · Caught in, under or between a moving and a stationary object
Employee was tasked with straightening and resetting the bonnet on the Raptor 400 Standard cone crusher. EE then reached in with a hand to remove the rock and the angle iron pinched a thumb between the corner of the angle iron and side of the bonnet causing a laceration to the right thumb.
2017 · 2 incidents
October 31, 2017
WA · Metal/Non-Metal
crusher attendant/operator, pan feeder operator/worker
DISORDERS (REPEATED TRAUMA)
CPM Development Corporation · (Not Elsewhere Classified)
MSHA Recordable Shift for Hearing Loss; Right Ear. Final determination and review for the confirmed recordable shift was notified to the employer on 01/06/2018.
March 3, 2017
WA · Metal/Non-Metal
crusher attendant/operator, pan feeder operator/worker
HANDTOOLS (NONPOWERED)
CPM Development Corporation · Struck by... (Not Elsewhere Classified)
Employee was using a utility knife to cut a hole in a belt to put a rope through, in order to lace the belt back onto the conveyor. Utility knife slipped resulting in 1" laceration to left thigh.
2016 · 1 incident
June 21, 2016
WA · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
POWERED HAULAGE
CPM Development Corporation · Struck by... (Not Elsewhere Classified)
Operator was preparing to flip cutting edge on skid steer bucket, bolt started to spin in hole so operator tried to push pin back in square hole. Spinning bolt cut EE's left index finger resulting in 5 stitches. Operator was wearing gloves.