Glen Mills Metal/Non-Metal

Employee fell on same level, resulting in sprain and strain injuries.

While removing C2 tail pulley guard, the guard made contact with the employee's face around employee's chin causing a laceration requiring stitches for wound closure.

Contractor fell while trying to climb down OEM ladder on a CAT 773E haul truck.

Employee slipped on loose stone at the bottom of a ladder causing a slip and fall on same level causing pain to right hand.

While using a retractable utility knife, contact was made between the blade and employee's right knee causing a laceration.

Tripped over string used to bundle cardboard boxes.

The employee was standing on the first rung of a step ladder helping out on a crusher repair job when they went to step down and lost balance falling on the catwalk. The employee struck elbow on the catwalk.

While attempting to obtain a sample of material at the 2A stockpile the employee felt a pop in EE's arm.

Left shoulder dislocated while dismounting quarry truck causing EE to fall.

Employee was climbing stairs in tertiary plant when the rung on the step broke and the employee fell forward hitting knee.

Miner was injured on 10/7/2019 and continued working until 12/18/2019 when miner's doctor put miner off of work. Miner was climbing down a ladder of a haul truck when miner stepped on a rock and hurt knee.

While descending a portable ladder, employee missed the last rung and fell backwards. The employee received a fracture to the left foot.

Employee was climbing a ladder and about 8 ft high employee went to step on an angle and it broke which caused employee to fall and strain left lumbar and shoulder.

WHILE TWO EMPLOYEES WERE WORKING OUT OF THE MAN BASKET EE'S HAND BECAME PINCHED BETWEEN THE CONVEYOR SLED AND THE MAN LIFT HANDRAIL. THIS MOTION REMOVED THE SKIN FROM THE TOP OF EE'S HAND TO EE'S FINGERS. EE WAS TRANSPORTED BY AMBULANCE TO CROZER HOSPITAL WHERE EE HAD SURGERY ON THE HAND

Employee was under shaker holding the nuts for another Employee using an impact gun to tighten when pieces of dirt fell and went into the right eye causing it to irritate the eye

Employee went to sit down on a guard and it gave out causing employee to hit their head and elbow on the wall behind them.

Employee climbing up machine put fuel nozzle in and began fueling the 988f. EE climbed back down to check machine over it auto shut off engaged when full. EE climbed back up to top fuel off as EE was topping off, EE slipped off step landed directly on feet and felt right knee pop.

Employee was moving an oil barrel and stepped on a stone twisted left knee

Employee states EE slipped on ice on EE's right elbow near restrooms across from garage resulting in pain in EE's right elbow

Employee twisted knee exiting conveyor head box. Employee was treated at Riddle Hospital where he was diagnosed with a right knee sprain and discharged with instructions of "No weight bearing on right leg until released".

While descending the stairs in the tertiary plant one of the treads broke free causing the ee to sprain his right knee. The employee was treated and returned to restricted duty.

IE was assisting a fellow EE in the removal of a water pump. It was being lifted with the aid of a come-a-long. It appears there was a mechanical failure in the lifting device that caused the pump to drop suddenly. When the pump dropped it jerked his arm as he was holding onto the chain guiding the pump. This caused a strain to his right arm. He returned to modified duty.

Employee was exiting the welding truck. As he stepped on the running board the bracket broke. The sudden drop caused him to slip and jerk his lower back. He was treated for a lower back strain and returned to restricted duty.

The injured employee was struck by a horizontal support beam mounted on the metal decking as it was being removed at the primary crusher. The metal decking was initial struck and broke free shifting the weight.

EE was walking out of the electric house for the plant slipped after taking step to the outside.EE was diag. with a lower back sprain and told to stay out of work for a few days by the treating phys.

While installing speed reducer on head pulley conveyor 26, EE pushed the speed reducer onto shaft. Injured had his hand on back side wiggling the reducer for it to slide onto shaft. When it shot on, EE's right hand fifth finger got smashed between the speed reducer and a piece of angle.

After cutting bushing off of shaft of speed reducer, he leaned over to look at the work, and while holding torch in left hand inadvertently moved torch over his lower right arm causing burn.

EMPLOYEE BENT OVER AND PICKED A 5 GALLON SPRING WATER BOTTLE (FULL)WITH ONE HAND AND SLIGHTLY PULLED LOWER BACK MUSCLE

EMPLOYEE WAS MOUNTING THE TRUCK, PUT HIS FOOT ON SECOND STEP OF THE LADDER, SLIPPED AND FELL TO THE GROUND.

EMPLOYEE WAS ROLLING 55 GALLON DRUMS OF OIL OUT OF THE WAY. THE FIRST THREE DRUMS WERE HALF FULL AND MOVED EASILY. THE FOURTH DRUM WAS COMPLETELY FULL, AND WHEN HE TRIED TO MOVE IT HE FELT A PAIN IN HIS GROIN AREA.

Employee dropping off paper work @ office, realized office had been burglarized, for fear he backed out and fell off the step.

WAS PULLING HOSE ON FUEL TRUCK, WHEN HE SLAMMED HIS ELBOW INTO THE STEEL TRACK OF THE SHOVEL (HITACHI).

GOT OUT OF CAB OF WATER TRUCK TO MAKE SURE IT WAS LINED UP. STEPPED ON LEFT SIDE OF CAB AND LOST HIS FOOTING, FELL APPROXIMATELY 72" TO THE GROUND.

GOING INTO SHOT ROCK PILE, EE'S TIRE WENT OVER SOME TOE AND HIS LOADER ROLLED FORWARD INTO A LARGE ROCK WITH HIS BUCKET, JARRING HIS BACK.

OPERATING WATER TRUCK. WHILE WETTING DOWN #5 BENCH, EE HIT A RUT (POTHOLE) AND JARRED HIS BACK.

EMPLOYEE WAS TAKING GREASE FITTING OUT OF ADJUSTMENT CYLINDER FOR TAILPULLEY & PRESSURE IN CYLINDER SHOT GREASE FITTING INTO HIS LEFT HAND BETWEEN INDEX & MIDDLE FINGER CAUSING PUNCTURE WOUND.

STANDING ON STEPS IN FRONT OF HAUL TRUCK TO ACCESS BRAKE VALVES. WHEN HE LOST BALANCE AND CAUGHT HIMSELF BY GRABBING HAND RAILING TO KEEP FROM FALLING.