Email me when a new MSHA incident is filed at Raleigh-Durham Quarry.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 12,470 | 0 | 0 | 0.0 |
| 2025 Q3 | 4,531 | 0 | 0 | 0.0 |
| 2025 Q2 | 11,080 | 0 | 0 | 0.0 |
| 2025 Q1 | 4,273 | 0 | 0 | 0.0 |
| 2024 Q4 | 8,697 | 0 | 0 | 0.0 |
| 2024 Q3 | 5,443 | 1 | 0 | 183.7 |
| 2024 Q2 | 1,198 | 0 | 0 | 0.0 |
| 2024 Q1 | 4,778 | 1 | 0 | 209.3 |
Employee was using a pry bar to pry class B material (erosion control stone) loose in a clogged chute. As the employee pulled on the pry bar, it slipped loose striking the employee in the left eyebrow area.
Employee bent down to pick up a wheel chock and felt a pop in his back. He was put on restricted duty on 6/12/2012.
Employee was meeting with a local Sales Rep in the office when he complained of dizziness and chest pain/racing heart. Office Manager was instructed to call for Local EMS. Employee was transported to hospital for evaluation.
Employee was assisting with the stemming of a shot. Employee finished task and reported that he was feeling ill with chest pain. Local EMS was notified and he was transported to the Hospital. This event was found to have been medical in nature and not related to mining activities.
Inspector was attempting to climb the ladder to mount the TR 70 Terex haul truck when he injured his knee. He had his left knee on the ladder and pushed himself up with the right when he heard a "pop" and felt pain in his right knee. He finished out the inspection and went to the Dr the next day and was diagnosed with a pulled muscle and put on light duty for a week.
EE opened a hatch cover in the deck of the screen platform with the intent to shovel spilled material into a chute. He walked away to pick up the shovel and when he returned, he stepped into the open hole and fell onto the deck, resulting in a cracked rib. Medical only, no lost time.
Employee performing 1000 service on 988H loader when he dropped one end of the skid plate to get better access to the transmission oil drain plug. He was removing the last of 4 bolts when the last bolt came out quicker than expected. Weight on skid plate (appx 30 lbs) slipped & corner of plate slashed employee's left thumb inside the first knuckle requiring 4 stitches.
Employee stated that he was doing a pre-shift inspection on the loader when he began to cough which caused him to slip and hurt his back. He reported this to the leadman later that morning. Reported as first aid. Began losing time on 5/7/07 allegedly due to the incident on 1/9/07.
EE was removing a pin from the excavator bucket. Pin was knocked out from other side and EE tried to hold it, but it slipped and mashed his little finger of right hand, resulting in broken bone and 3 stitches. Medical only. No lost time.
Employee removing bolts from cutting edges on 988g loader w/2 lbs hammer and knock wrench. Employee sung hammer to strike the wrench and missed hitting left hand causing a 1/4 inch gash that required 3 stitches.
Loading rock from muck pile in pit big rock hit bucket and jarred machine causing injury to back. Employee going to physician to check out. Continued having problems. Put out of work by Raleigh Orthopaedic 11/28/05. Released to return to work 12/5/05.
EE WAS CUTTING HOSE FOR WELDING LEAD HOOKS WITH RETRACTABLE UTILITY KNIFE AND CUT LEFT FOREFINGER FROM 2ND KNUCKLE TO TIP. LACERATION REQUIRED 4 STITCHES.
EE WAS CUTTING RUBBER WASHERS OUT OF OLD, CONVEYOR BELT, WITH A UTILITY KNIFE, TO PUT ON JAW SWING DIE BOLTS. THE KNIFE SLIPPED AND CUT THE TOP OF HIS LEFT THUMB. HE WAS WEDDING. LEATHER WORK GLOVES. HE RECEIVED 7 STITCHES AND RETURNED TO WORK.