Mining Incidents

K-T Feldspar Plant and Mine Metal/Non-Metal

The Quartz Corp USA · Facility
Spruce Pine, Mitchell County, NC  ·  Active
MSHA Mine ID: 3101334

Watch this mine

Email me when a new MSHA incident is filed at K-T Feldspar Plant and Mine.

Fatalities
0
Total incidents
42
Years on record
2000–2023
Latest incident
Sep 2023
Compliance record
MSHA citations since 2000
247
citations
60
significant & substantial
$213,650
proposed penalties
$149,232
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2025 Q4 25,611 1 0 39.0
2025 Q3 22,043 5 1 226.8
2025 Q2 5,500 0 0 0.0
2024 Q4 5,257 0 0 0.0
2024 Q3 11,726 9 1 767.5
2024 Q2 31,625 0 0 0.0
2024 Q1 10,287 8 0 777.7
2023 Q4 30,079 0 0 0.0
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.

Reportable incidents

42 on file

2023 · 2 incidents

September 13, 2023 NC · Metal/Non-Metal bagging, package operator STRIKING OR BUMPING
The Quartz Corp USA · Struck against stationary object

Employee was walking on a catwalk and hit EE's left arm on a piece of sharp metal being used as a screen.

April 26, 2023 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
The Quartz Corp USA · Struck by falling object

While carrying a piece of 2" steel pipe a miner lost footing and fell to the ground. The pipe EE was carrying also fell striking EE in the head just above the left eye.

2022 · 1 incident

June 17, 2022 NC · Metal/Non-Metal electrician, lineman HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion in lifting objects

The employee was picking up boxes when EE felt a pinch in EE's back. The pain got worst as the day went on. On 06/18/2022 EE reported it to management. On Monday 06/20/2022 EE went to the doctor and was wrote out of work for a pulled muscle.

2021 · 1 incident

May 28, 2021 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck by flying object

A maintenance worker reported getting dust in both eyes at some point during the prior workday. EE was taken to Urgent Care as soon as reported. Employee's eyes were flushed with water. Prescription eye drops were given and used. On the next working day, the employee stated "EE was fine now." No lost time occurred.

2020 · 5 incidents

December 7, 2020 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck against stationary object

While cleaning up debris after a maintenance task, old steel was being picked up and placed on a fork lift. As the employee picked up a piece of discarded metal there was on unseen "burr" attached to the backside. It cut through a leather glove and lacerated the little finger on the employee's right hand

August 24, 2020 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion in lifting objects

Employee was stacking 50 lb. bags and felt pain in EE's right shoulder. EE later reported it to EE's supervisor.

August 13, 2020 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
The Quartz Corp USA · Bodily reaction, (Not Elsewhere Classified)

Employee reported that on the 8/10/2020 they were mounting a forklift, using the grab handle and steps provided on machine. As they swung around into the seat they felt a pain in lower back. The employee reported this to supervisor on 08/13/2020 at 7:30 am. The employee normally works 2nd shift. Employee went immediately to the company physician.

February 5, 2020 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

A maintenance worker was stepping over a pipe while attempting to remove it from a scrubber box. EE's left foot slipped and EE's knee buckled. EE has missed no time as EE was put on light duty. EE is wearing a knee brace.

January 29, 2020 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

Operator had just gotten out of machine turn to walk away and lost balance. This resulted in them shifting all their weight onto left ankle. They heard and felt a "pop" and reported it right away.

2019 · 1 incident

January 2, 2019 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
The Quartz Corp USA · Caught in, under or between running or meshing objects

Employee reached into an observation port to see if material was flowing. EE left hand (fingers) contacted an energized rotary valve. Causing a pinch injury to 3 fingers

2018 · 3 incidents

October 23, 2018 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
The Quartz Corp USA · Struck by... (Not Elsewhere Classified)

An employee was using a box cutter to remove packing material from belt. EE inadvertently made contact with EE's left leg. It resulted in a 3/4" cut to EE's inner thigh.

March 4, 2018 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
The Quartz Corp USA · Caught in, under or between a moving and a stationary object

Placed hand by rack and left tip of middle finger was smashed.

January 12, 2018 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Absorption of radiations, caustics, toxic and noxious substances

While unclogging a chemical supply line material inadvertently contacted miners left eye. Causing a chemical burn to the eye

2015 · 2 incidents

December 4, 2015 NC · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion in lifting objects

EE was transferring inventory to shelf and strained lower back

August 5, 2015 NC · Metal/Non-Metal bagging, package operator HANDLING OF MATERIALS
The Quartz Corp USA · Caught in, under or between a moving and a stationary object

The ladder way access to the railcar/tanker truck loadout had a pinch point near the handle.

2011 · 1 incident

April 18, 2011 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

While in the process of tightening a nut on a motor base, employee felt pain in lower right back area.

2010 · 2 incidents

September 9, 2010 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck by flying object

Upon initially performing maintenance at RE machines at dryer in plant, employee apparently got a dust particle in the eye. Eye was treated with solution at local clinic. Employee returned to work immediately afterwards.

2009 · 5 incidents

July 1, 2009 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck against stationary object

Employee was loosening a tight nut on the shaker feeder at the jaw crusher, when the nut suddenly came loose. The employee's right forearm struck against a nearby piece of of angle iron and the employee sustained a small cut and bruising.

June 27, 2009 NC · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDLING OF MATERIALS
The Quartz Corp USA · Caught in, under or between a moving and a stationary object

Employee sustained laceration to ring finger of right hand, when a part he was manually handling with another employee slipped from his grip and caught his finger between the part and the timber pallet on the floor. Employee received 5 stitches. Returned to work with no restrictions same day, no lost time.

June 19, 2009 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck by falling object

Employee was under machine laying on his back looking up to loosen the drive belt during repair of excavator/rockbreaker. He knocked some loose sand away from the drive belt and sand fell in his left eye. Physician removed a small piece of embedded metal from the employee's left eye and prescribed a preventative antibiotic.

June 4, 2009 NC · Metal/Non-Metal electrician, lineman HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

Employee felt a pull in his right knee when he stepped down from the last rung of a fixed ladder to uneven ground. The employee strained the same knee again on 6/8/09 when he stepped into a depression in the floor that was covered by sand. The employee did not report either incident until 6/8/09. The employee was given a brace for his knee by the physician.

April 14, 2009 NC · Metal/Non-Metal superintendent SLIP OR FALL OF PERSON
The Quartz Corp USA · Fall from scaffolds, walkways, platforms

Employee was installing a conditioner onto float platform. Handrails had been removed for access of conditioner. Employee lost his footing while removing a 4 inch pvc pipe and fell approximately 6 feet to bottom floor. Head struck concrete floor causing concussion and head injury. Employee was working 5 feet from edge of platform which was clearly marked with caution tape.

2008 · 4 incidents

November 14, 2008 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
The Quartz Corp USA · Caught in, under or between a moving and a stationary object

While changing a RE belt, employee used a pry bar to raise roller and roller slipped, striking his left thumb. Stitches were required, thus causing a reportable accident.

September 28, 2008 NC · Metal/Non-Metal drill operator SLIP OR FALL OF PERSON
The Quartz Corp USA · Fall to lower level, (Not Elsewhere Classified)

Employee's task was drilling. He stopped drilling and went into the woods to relieve himself. He then stood on a rock to look around and fell as he jumped off the rock breaking his left wrist

July 23, 2008 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
The Quartz Corp USA · Struck by... (Not Elsewhere Classified)

Employee struck himself with knife causing a cut 1/2 inch wide while cutting belts from main dust collector fan at bagging and loading. Conditions contributing to accident would be fatigue and complacency with knife. Reportable due to stitches

April 1, 2008 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
The Quartz Corp USA · Fall to the walkway or working surface

Employee tripped and fell, striking right shoulder on platform. Employee tripped on foundation of seat used during his task.

2004 · 1 incident

April 17, 2004 NC · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management HANDLING OF MATERIALS
The Quartz Corp USA · Struck by... (Not Elsewhere Classified)

EE was replacing an air slide. Due to length of airslide ee had cut the equipment into two 8 foot sections in order for easier handling and for discarding roof. The air slide struck the ee's foot when it was removed from the roof.

2003 · 3 incidents

October 17, 2003 NC · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

PULLING/LIFTING IN ORDER TO CHANGE BELT ON ELEVATOR. PULLED OR STRAINED MUSCLE IN LOWER BACK. WENT TO DOCTOR 10/27/03 AND GIVEN PRESCRIPTION MEDICATION & RESTRICTED DUTY.

August 20, 2003 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS HANDLING 4" BY 6" TIMBERS (WOOD BEAMS) AND MASHED FINGER. REPORTABLE DUE TO MODIFIED WORK DUTY.

January 29, 2003 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
The Quartz Corp USA · Struck against a moving object

EE WAS TRAVELING DOWN STEEP GRADE IN FRONT END LOADER, WHEN ENGINE FAILED. THE BRAKES & STEERING FAILED WHEN ENGINE STALLED. EE STRUCK A FORKLIFT AT BOTTOM OF GRADE. REPORTABLE DUE TO RESTRIC TED DUTY VIA DR.

2002 · 1 incident

June 4, 2002 NC · Metal/Non-Metal truck driver HANDLING OF MATERIALS
The Quartz Corp USA · Struck by falling object

EMPLOYEE WAS CUTTING SMALL TREE DOWN TO CLEAR AREA. WHILE UNDER SUPERVISION THE EE FELL. THE TREE, HOWEVER WHEN IT CAME TO REST IT STRUCK THE EE'S LEFT ANKLE. EE DID NOT SEE DR THINKING IT W AS ONLY BRUISED UNTIL 6-7-02. REPORTABLE DUE TO BREAK.

2001 · 5 incidents

July 18, 2001 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
The Quartz Corp USA · Struck by... (Not Elsewhere Classified)

EE WAS PULLING PIPE DOWN IN FLOTATION BLDG FOR EQUIPMENT CHANGEOVER. THE PIPE POPPED OUT DUE TO TENSION AND THE FLANGE STRUCK THE EE IN THE RIGHT SIDE RIBS.

July 9, 2001 NC · Metal/Non-Metal electrician, lineman HANDLING OF MATERIALS
The Quartz Corp USA · Struck by falling object

EMPLOYEE WAS INSTALLING LIGHT FIXTURE IN BAGGING/LOADING BATHROON. USED BOLT TO SECURE AN END OF 8' LIGHT FIXTURE WHILE PREPARING TO SECURE THE OTHER END. THE BOLT WORKED OFF THIS ALLOWING THE FIXTURE TO FALL WHICH STRUCK THE EMPLOYEE.

June 27, 2001 NC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
The Quartz Corp USA · Over-exertion (Not Elsewhere Classified)

EE WAS CLOSING DOOR TO RAILCAR PRIOR TO LOADING.THE DOOR JAMMED WHILE CLOSING CAUSING HIM TO PULL HIS GROIN MUSCLE ALONG HIS RIGHT LEG. REPORTABLE DUE TO RESTRICTED DUTY.

February 22, 2001 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
K-T Feldspar Corp · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS USING UTILITY KNIFE TO CUT TIE WRAPS FROM PIPE. THE KNIFE SLIPPED CUTTING THE EMPLOYEE'S LEFT INDEX FINGER. REPORTABLE DUE TO STITCHES RECEIVED.

January 3, 2001 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
K-T Feldspar Corp · Absorption of radiations, caustics, toxic and noxious substances

EE DISCOVERED OLD SULFURIC ACID LINE ENTANGLE ON THE FLOAT PADDLE SHAFT. EE CUT LINE FREE FROM SHAFT NOT KNOWING THE LINE WAS AN OLD SULFURIC ACID LINE. WHEN THE PIPE WAS CUT, TENSION ON THE L INE CAUSED THE PIPE TO STRIKE THE EE'S FACE & SPLASHED ACID ON THE RIGHT SIDE OF HIS FACE AND INTO RIGHT EYE. EE DID HAVE SAFETY EQUIPMENT IN USE AT TIME OF INCIDENT AND USE PROPER SAFETY PRO

2000 · 5 incidents

November 17, 2000 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
K-T Feldspar Corp · Over-exertion (Not Elsewhere Classified)

EE WAS INSIDE DEYER SCRUBBER WELDING A PATCH. DUE TO SMALL AREA IN WHICH EE HAD TO WORK, BODY WEIGHT WAS SHIFTED DIRECTLY OVER RIGHT FOOT AND LEG. FOOT WAS ASLEEP AFTER TASK AND CONTINUED SO O VER THE WEEK-END. TOOK TO CO DR ON 20 NOV 00 ANDPLACE ON RESTRICTED DUTY DUE TO INFLAMMED DISC IN LOWER BACK.

November 7, 2000 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
K-T Feldspar Corp · Struck by flying object

EE WAS TURNING WELDING HELMET DOWN ONTO FACE WHEN A FOREIGN OBJECT ENTERED INTO RIGHT EYE. REPORTABLE DUE TO PRESCRIPTION MEDICATION.

June 24, 2000 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
K-T Feldspar Corp · Caught in, under or between (Not Elsewhere Classified)

EE WAS HELPING REMOVE RODS FROM RODMILL. WHILE PUTTING RODS ON FORKLIFT HIS SMALL FINGER WAS PINCHED CAUSING THE ACCIDENT. REPORTABLE DUE TO STITCHES RECEIVED.

January 31, 2000 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
K-T Feldspar Corp · Fall to the walkway or working surface

EE FELL DUE TO ICY CONDITIONS WHICH EXISTED DUE TO SEVERE WINTER STORM. EE WAS DOING NORMAL STARTUP PROCEDURES & FELL INJURING LEFT ARM. DR.'S VISIT RESULT IN RESTRICTED DUTY.

January 7, 2000 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
K-T Feldspar Corp · Fall to the walkway or working surface

EMPLOYEE WAS WASHING OUT WORK AREA WITH WATER HOSE. EMPLOYEE SLIPPED AND CAUGHT HIMSELF WITH HIS LEFT ARM HURTING HIS LEFT SHOULDER. DOCTOR VISIT RESULTED IN RESTRICTED DUTY.