Mining Incidents

Burlington Quarry Metal/Non-Metal

Burlington, Alamance County, NC  ·  Active
MSHA Mine ID: 3100042

Watch this mine

Email me when a new MSHA incident is filed at Burlington Quarry.

Fatalities
0
Total incidents
10
Years on record
2001–2020
Latest incident
Feb 2020
Compliance record
MSHA citations since 2000
134
citations
34
significant & substantial
$22,062
proposed penalties
$18,265
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2025 Q4 7,215 0 0 0.0
2025 Q3 3,993 0 0 0.0
2025 Q1 3,369 0 0 0.0
2024 Q4 5,827 0 0 0.0
2024 Q3 3,600 0 0 0.0
2024 Q2 5,709 0 0 0.0
2024 Q1 8,055 0 0 0.0
2023 Q4 3,780 0 0 0.0
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.

Reportable incidents

10 on file

2020 · 1 incident

February 7, 2020 NC · Metal/Non-Metal welder (non-shop) HANDTOOLS (NONPOWERED)
Martin Marietta Materials Inc · Over-exertion (Not Elsewhere Classified)

Employee slightly bent over to lower a trailer onto a tow hitch using the trailer jack and pulled a muscle in EE's lower back

2019 · 1 incident

September 5, 2019 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Martin Marietta Materials Inc · Caught in, under or between a moving and a stationary object

Miner was using a hand controlled loader/skidsteer to clean surge tunnel. Miner's finger became caught between the controls and the frame of the conveyor causing a laceration and compound fracture.

2008 · 2 incidents

August 11, 2008 NC · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management HANDTOOLS (NONPOWERED)
Martin Marietta Materials Inc · Struck by... (Not Elsewhere Classified)

A rock jam occurred in the box over the 7' crusher. While attempting to remove the jam, the bar that was used shifted, striking EE in the mouth. This resulted in 8 stitches.

2007 · 1 incident

May 24, 2007 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Martin Marietta Materials Inc · Struck by... (Not Elsewhere Classified)

EE was holding the hydraulic wrench used to tighten swing die wedge bolts. While tightening a bolt, the bolt started getting tight, the wrench started to shift up mashing the EE's middle finger on his left hand. The injury resulted in 5 stitches and a fracture to tip of finger.

2006 · 1 incident

March 13, 2006 NC · Metal/Non-Metal coal/ore shovel operator, shoveler, power shoveler SLIP OR FALL OF PERSON
Martin Marietta Materials Inc · Fall to the walkway or working surface

EE was exiting the boom truck, his foot got caught between the truck and fuel tank. EE fell straining groin muscle. He went to the doctor 3/13/2006, received treatment and returned to work. After a period of time he complained that the injury still existed, returned to the doctor 4/3/2006 recommended three weeks recovery.

2005 · 2 incidents

May 21, 2005 NC · Metal/Non-Metal inspector HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EE WAS USING A HOIST CHAIN TO MOVE A METAL DOOR TO REDIRECT SCREENINGS. HOIST CHAIN HOOK SLIPPED OFF OF THE METAL DOOR AND HOIST ARM STRUCK THE EE IN THE MOUTH, CUTTING HIS LOWER LIP. REQUIRED STITCHES.

January 25, 2005 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EMPLOYEE STATED THAT HE HIT HIS HEAD ON A PIPE WHICH CAUSED HIS HARD HAT TO STRIKE THE BACK OF HIS NECK WHICH CAUSED A KNOT ON HIS NECK. HE SAID HE REPORTED IT TO THE PLANT LEADMAN BUT NOTHING WAS DONE BECAUSE THERE WAS NO UNUSUAL PAIN OR ANY COMPLICATIONS AT THE TIME. ON 3/11/05 EE REPORTED THE INCIDENT AGAIN AS HIS DR. SAID HE COULD NEED SURGERY, SURGERY REQUIRED 11/07/05.

2002 · 1 incident

July 10, 2002 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

EMPLOYEE CLEARING JAW JAM WAS KNOCKED DOWN ACCIDENTLY WHEN BELT WAS STARTED ACCIDENTLY. THIS INCIDENT HAPPENED ON 7/10. ON 7/22 HE WAS PUT OUT OF WORK BY THE DOCTOR FOR CONTINUING NECK PAIN.

2001 · 1 incident

May 21, 2001 NC · Metal/Non-Metal chute blaster, rockman, hang-up man, raise blaster MACHINERY
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EE WAS MOWING AND A PIECE OF GRASS GOT IN HIS EYE.