Mining Incidents

PLACITAS Metal/Non-Metal

CalMat Co · Surface
Controlled by Vulcan Materials Company
Albuquerque, Sandoval County, NM  ·  Active
MSHA Mine ID: 2901475

Watch this mine

Email me when a new MSHA incident is filed at PLACITAS.

Fatalities
0
Total incidents
21
Years on record
2004–2025
Latest incident
May 2025
Compliance record
MSHA citations since 2000
162
citations
44
significant & substantial
$135,624
proposed penalties
$100,869
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2025 Q4 7,563 0 0 0.0
2025 Q1 11,272 0 0 0.0
2024 Q4 7,863 1 0 127.2
2024 Q3 8,078 0 0 0.0
2024 Q1 10,040 2 0 199.2
2023 Q4 12,370 0 0 0.0
2023 Q3 12,956 0 0 0.0
2023 Q2 9,988 1 0 100.1
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.

Reportable incidents

21 on file

2025 · 1 incident

May 28, 2025 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

On 05-29-25 employee alleges a strain to the left lower back when operating a CAT 769D haul truck. EE states that the initial left lower back strain occurred on 05-28-25. While the employee was attempting to move a pallet with a pallet jack. On 05-30-25 employee was treated by a MD for a strain to the left lower back, resulting in modified work activity.

2023 · 1 incident

January 24, 2023 NM · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

On Tuesday 1/24/2023 the EE experienced a first aid injury to EE's right shoulder while lifting channel iron. On 3/23/2023 EE visited the clinic and was diagnosed with a tear in EE's shoulder area and given work restrictions.

2022 · 1 incident

December 22, 2022 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
CalMat Co · (Not Elsewhere Classified)

Audiologist evaluation of annual audiogram shows that a reportable hearing loss has occurred.

2021 · 2 incidents

December 13, 2021 NM · Metal/Non-Metal master mechanic, foreman, supervisor HANDTOOLS (NONPOWERED)
CalMat Co · Struck by flying object

A water pump in the pond was being replaced by 6 employees. One employee was holding a 48" pipe wrench holding the shaft in place. Another employee was using a 36" pipe wrench to turn the shaft to break it free. As the employee turned the shaft, the employee holding the pipe wrench lost grip and the tool swung around coming off striking an employee in the head above left ear.

June 23, 2021 NM · Metal/Non-Metal dryer operator, kiln operator, dry plant operator, fluid operator, bed dryer operator SLIP OR FALL OF PERSON
CalMat Co · Over-exertion (Not Elsewhere Classified)

Employee exited water wagon which was parked by water stand to turn off water valve which is located 20' from water wagon. Employee stated they stepped on soft spot and twisted ankle.

2019 · 2 incidents

October 28, 2019 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
CalMat Co · Over-exertion (Not Elsewhere Classified)

On Thursday, November 14th, the employee reported to the site supervision that they were experiencing pain in abdomin due to overexertion from a task performed October 28, 2019. Employee alleges they felt a small (nickel sized) ball behind belly button they felt on Tuesday, November 12th at home.

September 11, 2019 NM · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STRIKING OR BUMPING
CalMat Co · Struck by falling object

Employees were replacing troughing idler on conveyor. Employees left removed idler leaning on conveyor. When employee began to re-install guards, they bumped and shook idler leaning on conveyor, it fell over striking them on the left metatarsal causing bruising

2018 · 2 incidents

December 1, 2018 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
CalMat Co · Over-exertion in pulling or pushing objects

EE was performing maintenance with a pry bar and allegedly felt a pull in the stomach area. Monday, EE stated EE was lifting grease cover and felt a pop in the stomach area.

March 21, 2018 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer DUST DISEASE OF LUNGS
CalMat Co · Inhalation of radiations, caustics, toxic and noxious substances

Employee had a periodic screening chest x-ray read by two B-readers using the ILO procedures. The X-ray was characterized as consistent with pneumoconiosis with readings of <=1.5mm and <=1.5mm. Damage or impairment cannot be determined solely by reading chest x-ray films. This report is being submitted to satisfy MSHA program policy letter P92-III-2.

2017 · 5 incidents

June 29, 2017 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer FALLING/SLIDING/ROLLING MATERIALS
CalMat Co · Caught in, under or between collapsing material or buildings

The employee was entrapped and sustained injuries while acting as a first responder to 2 fellow workers who had become entrapped at the primary surge pile.

June 29, 2017 NM · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor FALLING/SLIDING/ROLLING MATERIALS
CalMat Co · Caught in, under or between collapsing material or buildings

The employee was entrapped and sustained injuries while acting as a first responder to 2 fellow workers who had become entrapped at the primary surge pile.

June 29, 2017 NM · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator FALLING/SLIDING/ROLLING MATERIALS
CalMat Co · Caught in, under or between collapsing material or buildings

While working to unplug a feeder/draw-hole at the primary surge pile, the employee became entrapped when material sloughed from the surge pile. Employee became dehydrated while entrapped.

June 29, 2017 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer FALLING/SLIDING/ROLLING MATERIALS
CalMat Co · Caught in, under or between collapsing material or buildings

While working to unplug a feeder/draw-hole at the primary surge pile, the employee became entrapped when material sloughed from the surge pile. Employee sustained broken bones in leg.

April 17, 2017 NM · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
CalMat Co · Over-exertion (Not Elsewhere Classified)

Employee was filing the feeder on the portable plant with oil in the tank. Step out of feeder enclosure and left knee popped.

2016 · 1 incident

April 16, 2016 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
CalMat Co · Struck against stationary object

Employee alleges they were exiting the conveyor frame and placed left knee on the channel frame and tried to exit the frame, when they felt a sharp pain in left knee.

2014 · 1 incident

November 10, 2014 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
CalMat Co · Struck against a moving object

Newly hired employee requested medical treatment on 11-10-14 and was placed on restricted duty which is being accommodated. The employee alleged that while operating a dozer pushing material, he backed to the top of the slope and when the dozer broke over to even ground, he felt pain in his lower back and leg. He was diagnosed with a lumbar strain and disc degeneration.

2006 · 1 incident

July 26, 2006 NM · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Lafarge Southwest · Caught in, under or between a moving and a stationary object

Changing the position of a radial stacker. As employee was reaching to remove the blocks, a coworker pushed the stacker and employee's finger was caught between the block and the stacker tire causing a laceration and requiring stitches.

2005 · 1 incident

August 12, 2005 NM · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Lafarge Southwest · Struck by falling object

Changing tracks, removing last bolt when the track dropped and pinched hand requiring stitches.

2004 · 3 incidents

October 18, 2004 NM · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Lafarge Southwest · Struck against a moving object

WHILE OPERATING EQUIPMENT, RAN OVER LARGE ROCK THAT JOSTLED OPERATOR INSIDE THE CAB.

February 17, 2004 NM · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Lafarge Southwest · Caught in, under or between (Not Elsewhere Classified)

EE WAS PUTTING PIN AND SPACERS ON PIECE OF EQUIPMENT WITH THE HELP OF 2ND EE. THE 2ND EE PINCHED THE HAND OF THE 1ST EE WITH THE RIPPERS, CAUSING A LACERATION OF HIS FINGER WHICH WAS STITCHED THAT SAME DAY.

February 16, 2004 NM · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Lafarge Southwest · Struck against a moving object

EQUIP. OPERATOR CHOSE TO CHANGE THE NORMAL ROUTE OF HAUL. HE CROSSED THE PATH WHICH THE SCRAPERS HAD BEEN HAULING AND HIT A ROUGH SPOT, CAUSING A JOLT AND INJURING HIS BACK. IT IS UNKNOWN WHY THE OPERATOR CHANGED THE HAUL ROUTE FROM WHAT HE WAS INSTRUCTED TO DO.