Mining Incidents

Hooksett Crushed Stone C607 Metal/Non-Metal

Pike Industries Inc · Surface
Controlled by CRH PLC
Hooksett, Merrimack County, NH  ·  Intermittent
MSHA Mine ID: 2700192

Watch this mine

Email me when a new MSHA incident is filed at Hooksett Crushed Stone C607.

Fatalities
0
Total incidents
12
Years on record
2000–2021
Latest incident
Jun 2021
Compliance record
MSHA citations since 2000
60
citations
9
significant & substantial
$10,149
proposed penalties
$8,527
paid to date
Source: MSHA violations data, updated weekly.
Quarterly safety rates
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2025 Q4 5,740 0 0 0.0
2025 Q3 7,031 0 0 0.0
2025 Q2 8,061 0 0 0.0
2025 Q1 3,191 0 0 0.0
2024 Q4 6,599 0 0 0.0
2024 Q3 986 0 0 0.0
2024 Q2 7,767 0 0 0.0
2024 Q1 2,065 1 0 484.3
Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
No fatalities recorded at this mine.

Reportable incidents

12 on file

2021 · 1 incident

June 7, 2021 NH · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Pike Industries Inc · Flash burns (welding)

Employee was welding while wearing short sleeve shirt. Resulted in burns to forearms.

2019 · 1 incident

February 13, 2019 NH · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker SLIP OR FALL OF PERSON
Pike Industries Inc · Fall down stairs

Employee was walking into office trailer when employee slipped on icy step. Employee fell and lost consciousness.

2016 · 2 incidents

October 7, 2016 NH · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker SLIP OR FALL OF PERSON
Pike Industries Inc · Over-exertion (Not Elsewhere Classified)

Employee was exiting from skid steer when employee rolled ankle resulting in a sprained ankle.

April 29, 2016 NH · Metal/Non-Metal utility man, shift tech, service/dump truck operator POWERED HAULAGE
Pike Industries Inc · Over-exertion (Not Elsewhere Classified)

After operating new loader employee began to feel pain in wrist.

2015 · 1 incident

September 17, 2015 NH · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Pike Industries Inc · Struck against a moving object

Haul truck flipped over and down face of sand pile.

2013 · 1 incident

March 27, 2013 NH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Pike Industries Inc · Struck by... (Not Elsewhere Classified)

EE was cutting a piece of hose with a utility knife when he cut his gloved thumb. Three stitches were needed.

2009 · 1 incident

April 18, 2009 NH · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Pike Industries Inc · Struck by falling object

Employee states he was walking under the catwalk to the stairs of Tower #1. Debris fell from above, landed on top of his hard hat, he looked up & more debris fell into his right eye. He was wearing a hard hat and safety glasses at the time, the debris went into the space between the top of his safety glasses and the brim of his hard hat. Determined recordable on 8/18/2009.

2007 · 2 incidents

July 27, 2007 NH · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pike Industries Inc · Caught in, under or between a moving and a stationary object

Employee states he was removing the extension pre-strike off on a paver. He removed the bolts getting ready to remove the extension pre-strike off, when it slid down and catching his middle and ring finder on his right hand against the shop floor.

June 19, 2007 NH · Metal/Non-Metal welder (shop) MACHINERY
Pike Industries Inc · Struck by falling object

Employee states he was using a grinder on a tailgate. The vibration of the grinder caused the chute door to slide down and impact head.

2005 · 1 incident

July 12, 2005 NH · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management HANDTOOLS (NONPOWERED)
Pike Industries Inc · Struck by flying object

Employee was removing jack from under equipment when it shot out and struck forearm

2001 · 1 incident

July 31, 2001 NH · Metal/Non-Metal truck driver HANDLING OF MATERIALS
Pike Industries Inc · Over-exertion in lifting objects

EMPLOYEE WAS WORKING DOING HEAVY MANUAL LABOR WHILE REBUILDING CONE CRUSHER, LIFTING & CARRYING ITEMS.

2000 · 1 incident

April 19, 2000 NH · Metal/Non-Metal truck driver SLIP OR FALL OF PERSON
Pike Industries Inc · Fall from machine

WHLE EXITING BOBCAT WITH FORKLIFT APPROACH ON, HE SLIPPED ON TIRE & PUT LEFT ARM OUT TO CATCH HIMSELF FROM FALLING. NOTE: EE DID NOT REPRT THAT HE RECD MED TREATMENT UNTIL 7/13/00