Employee was working in a de-energized 4160 volt GFCI controller in an attempt to reverse the polarity of the wires when it somehow became energized.
Hudson Sand Mine Metal/Non-Metal
Watch this mine
Email me when a new MSHA incident is filed at Hudson Sand Mine.
- Fatalities
- 1
- Total incidents
- 3
- Years on record
- 2020–2023
- Latest incident
- Sep 2023
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 3,332 | 0 | 0 | 0.0 |
| 2025 Q2 | 0 | 0 | 0 | |
| 2025 Q1 | 2,535 | 0 | 0 | 0.0 |
| 2024 Q3 | 2,957 | 0 | 0 | 0.0 |
| 2023 Q4 | 0 | 0 | 0 | |
| 2023 Q3 | 2,729 | 1 | 0 | 366.4 |
| 2023 Q2 | 3,108 | 1 | 0 | 321.8 |
| 2023 Q1 | 0 | 0 | 0 |
Fatalities at this mine
1 recordedReportable incidents
2 on file (excluding fatalities above)2023 · 2 incidents
Miner was attempting to tighten the packing on a GIW slurry pump when the Channel lock pliers miner was using came in contact with the rotating shaft causing the Channel lock pliers to snap up and pinching miner's right thumb and ripping/bursting the skin open. Miner received 10 stitches at the emergency room.
The miner was starting up the dredge and while doing so was on EE's phone and did not observe that the water nozzle was coming around to the right too far. The water struck the side door of the dredge and the miner knocking EE down and causing EE to strike the side EE's head on the microwave oven. This caused a laceration to EE's scalp of 6 inches.