Email me when a new MSHA incident is filed at Inglis Quarry.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 1,734 | 0 | 0 | 0.0 |
| 2025 Q3 | 1,679 | 0 | 0 | 0.0 |
| 2025 Q2 | 1,767 | 0 | 0 | 0.0 |
| 2025 Q1 | 1,986 | 0 | 0 | 0.0 |
| 2024 Q2 | 1,993 | 0 | 0 | 0.0 |
| 2023 Q4 | 2,060 | 0 | 0 | 0.0 |
| 2022 Q1 | 1,155 | 0 | 0 | 0.0 |
| 2021 Q4 | 906 | 0 | 0 | 0.0 |
While climbing out of a rail pit employee brushed up against exposed live lead heater wires connected to hoist motor #1 running underneath platform. Wires were exposed and should have been disconnected or locked out. No damage or impairment was sustained to mining operation.
Employee was struck by a rock on the back of his neck.
While lifting a screen, the EE twisted the lower back.
employee was using arc gauge hook up to welder cutting off rebar & all thread from form reinforcement. He went to throw away the used rod & part of it dropped off into his boot & burned his leg before he could get his boot off.
Twisted back working on #7 scale weight.
While holding loading plate in awkward position above head onto primary crusher, employee began to experience stiffness to his right shoulder.
The ee was driving the truck in the quarry when the truck hit a dip in the road. The ee complained of pain in his left elbow.
While in the plant using a grinder as part of his job duties the employee got a foreign matter in the right eye.
The employee was moving a junction box for the page 740 dragline. He was walking along side of the junction box as the 966 loader was carrying it with a chain. The chain slipped off hitting the employee in the upper lip.
Employee was getting off water truck picking up lunch box and hit elbow on top of radiator cover.
Piece of steel fell off of a table hitting and braking employees right toe behind the steel in his steel toed boots
Employee slipped off the water truck and injured the left knee.
Employee bent over to retrieve his lunch box when he felt a sharp pain in the middle of his back.
Employee was in haul truck and the loader operator put a load of material in the back of the haul truck. The load had a big boulder that bounced the employee while he was in the haul truck hurting his back.
Employee was trying to fix the fan blade of the air conditioner on a loader when he was cut by the blade causing a laceration on his left middle finger.
EE WAS PERFORMING THE TASK OF GREASING THE HEAD PULLEY OF A CONVEYOR. HE HAD FINISHED GREASING AND WAS ATTEMPTING TO VISUALLY CHECK THE BEARING. HE CLIMBED OUT OF THE GUARDED AREA ON TO THE CONVEYOR BELT WITHOUT FALL PROTECTION. HE SLIPPED AND FELL 30 FEET TO THE STOCKPILE BELOW.
EE WAS REMOVING SIDE PLATE ON #1 SCREEN WITH A PRY BAR AND PLATE POPPED OFF STRIKING EE IN FOREHEAD CAUSING LACERATION OF SKIN REQUIRING STITCHES.
EE STRUCK HIS LEFT KNEE WITH A SLEDGEHAMMER WHILE KNOCKING A WEDGE OUT OF A DRAGLINE CABLE
EE STEPPED ON A ROCK & FELL BACKWARDS ON HIS BACK & HIT ROCKS ON THE GROUND WITH HIS BACK
EE WAS CLIMBING OFF OF LOADER, STEPPED IN A TRENCH AND TWISTED RIGHT KNEE.
THE EMPLOYEE WAS CLIMBING BACKWARDS OFF THE GRADER. THE STEPS BENT UNDER THE EQUIPMENT. THE EMPLOYEE MISSED THE STEP AND FELL BACKWARDS ONTO THEGROUND ON HIS BACK AND RIGHT WRIST.