Email me when a new MSHA incident is filed at Sun City Pit.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2020 Q2 | 1,211 | 0 | 0 | 0.0 |
| 2020 Q1 | 5,480 | 6 | 1 | 1094.9 |
| 2019 Q4 | 9,235 | 0 | 0 | 0.0 |
| 2019 Q3 | 5,101 | 9 | 3 | 1764.4 |
| 2019 Q2 | 9,951 | 0 | 0 | 0.0 |
| 2018 Q4 | 5,989 | 0 | 0 | 0.0 |
| 2018 Q3 | 7,087 | 3 | 0 | 423.3 |
| 2018 Q2 | 7,696 | 0 | 0 | 0.0 |
Employee was retrieving model number on a gear box. In order to do this they used a manlift to elevate 24'. EE removed the guarding, retrieved information, and proceeded to remove the motor assembly. The motor was not properly secured, it fell striking the employees leg. EMS was called to the site employee was taken to DVMC for treatment. Employee was released on 6/13/2019
While pulling a clump of polymer out of a clogged chemical mixing tank. Clump was solid on outside, center was powder and it blew into employees face and eyes.
Driving haul truck, hit a bump and jarred his back.
Employee fell off the catwalk of the excavator.
Employee was tightening a bolt when his glove was caught in between the washer and the frame.
Employee was using a pry bar and strained his shoulder.
Employee was lifting a one inch impact above his head, twisted wrong and strained his chest.
The conditions at the plant were all clean and in good shape. The problem happened when the employee slipped while putting in a bolt on the motor mount at the cone and was not wearing his fall protection equipment.
Employee was exiting crawl space area and stood up going forward striking his head on beam jamming his neck. Employee broke his hard hat when he struck beam. He worked for 3 weeks after accident until pain was only getting worse and he decided he better see a doctor.
JOSTLING IN HAUL TRUCK IN MINE PIT RESULTED IN CHATTERING OF TEETH WHICH CAUSED TOOTH TO FRACTURE
STEPPED OFF LADDER ON LOADER & FELT BACK POP. PULLED LOWER BACK MUSCLE.
Ee stated he was swinging sledge hammer to break up rocks. On one swing he missed hitting the rock causing his body to twist oddly causing strain.
SCREEN CHANGE ON BOTTOM DECK. SPRAIN OCCURRED WHEN HE PUSHED UP WHILE LYING ON HIS BACK. NOTE: 10/17 (FRIDAY) - DOCTOR TOLD HIM TO REST OVER THE WEEKEND & RETURN FOR FOLLOW-UP ON TUES 10/21/03 . PRESCP. MEDS GIVEN, PUT ON RESTRICTED DUTY & PHYSICAL THERAPY ON 10/21/03.
NEITHER OPERATOR NOR LABORER FOLLOWED PROPER LOCK-OUT PROCEDURE WHICH LEAD TO UNIT ACTIVATING. INJURED EE WENT IN TO FEEDER TO CLEAR ROCKS. OPERATOR SAW LABORER CLIMB OUT & LEANED OVER TO YEL L AT LOADER OPERATOR ON RADIO NOT TO DROP BUCKET OF MATERIALS. AS HE LEANED OVER, OPERATOR HIT FEEDER BUTTON & LABORER FELL ONTO BELT.
EE STATES "COULD ONLY USE RIGHT HAND TO PULL HIMSELF UP ONTO THE TRUCK. PUT RIGHT FOOT IN STEP ON FUEL TANK, REACHED UP AND GRABBED BAR. AS HE WAS PULLING HIMSELF UP, HIS FOOT SLIPPED & HIS WHOLE BODY SHIFTEDTO THE RIGHT & HE FELL ACROSS THE FUEL TANK.
LOADING OUT PIT RUN, BANK COLLAPSED, NO ONE AT FAULT.
EE WAS GRADING ROADS. HE WAS LETTING THE BLADE DOWN & WHEN THE BLADE TOUCHED THE ROAD, THE CONTROL LEVER KICKED BACK CAUSING WRIST TO BE JAMMED.
A/C BLOWER FAN ON 988 LOADER WAS STUCK. EE PUT HAND IN TO SPIN THE FAN AND IT STARTED UP AND UPLLED HIS FINGERS INTO IT. THE SWITCH HAD BEEN LEFT IN THE "ON" POSITION BY MISTAKE.
EMPLOYEE WAS ADJUSTING TAIL ROLL AT CRUSHING SITE WHEN WRENCH GOT CAUGHT CAUSING FINGERS TO BE SMASHED.